Parts

Shifting cables for Road/Mountain bikes.

FSA Mega Exo Small Parts.

- 6061 Forged Alloy - Made to O.E.M. specifications - Correct hardness to reduce damage to frame upon impact

- Missing links to make chain installation, maintenance and reparation easier - Card of 2

- Missing links to make chain installation, maintenance and reparation easier - Reusable up to 3 times - Compatible with 6, 7 and 8 speed IG drivetrains - Pin width: 7.1mm - Card of 2

- For MTB levers - 7mm x 1mm - Aluminum construction

- Alloy construction - Great for Cruiser or BMX bar conversions

- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool

- 3-spline steel cogs for use with Sturmey 3-speed (and 5-speed) internal gear rear hubs - Flat or dished for tuning chainline. Xylan coating for greater durability

- Replacement cable anchor bolt for brakes - Includes nut and washer

- Steel cable noodle with alloy end caps - Includes plastic liner

Standard replacement star nuts for threadless steerers.

- Aluminum w/lock nut - 18mm long/6mm O.D.

- Aluminum w/lock nut and mount - Slotted mount design

- With plastic washers - Shell: 8mm Allen head axle bolt

- Oversize 10mm - Fits new style MTB & BMX levers - Aluminum construction

- Chrome allen seat binder bolt

Odyssey A Brake shoes for all your braking needs.

- Left and right shifter compatible - Road and MTB compatible - 1.1mm polished stainless steel cable

Use to create your desired chain length in single-speed applications. Only one half link is needed. - Non-reusable - Width: 9.4 mm - Drivetrain Speeds: 1 - Color: Black - Chain Compatibility: Shimano , SRAM , Campagnolo , Connex , KMC

- Standard steel replacement

- Universal design - Use: Fits single rail

- Anodized or powder coated finish - Allows for secure clamping - Forged aluminum construction - 34.9mm clamp diameter

- Replacement link wire for cantilever brakes

- Alloy spacer converts an 8-speed rear hub to use a 7 speed cassette - Range: 4mm - Color: Silver

- DT Swiss cartridge bearings - Sold in pairs

- An economical replacement chain for 1 speed and 6/7 speed non-index shifting systems. - 1/2 x 1/8 - 300 grams

• Aluminum clamp with a chromoly bolt

- Aheadset preload adjusting bolt, cap and star nut - Bolt is hollow for cable pass-through

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 110 Series headsets. • Technical Description: EC34/28.6/H16/x • Top Type: EC - External Cup • Top Head Tube Inside Dia.: 34mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 16mm • Top Bearing Type: Top-quality, sealed stainless steel bearings • Material: 7075 aluminum • Weight: 55.26g